Product ID:TIN-LEAD SOLDER-WILL COVER ALL SOLDERS CONTAINING TIN & LEAD
MSDS Date:03/21/1988
FSC:3439
NIIN:01-008-7580
MSDS Number: CFKFX

NATIONAL WELDING ALLOYS, INC.

1600 SOUTH CANAL STREET
PITTSBURGH, PA 15215
US

Emergency Phone: 412-781-4255, CHEMTREC 800-424-9300

Info Phone: 412-781-4255

Cage: 0ACE2

NATIONAL WELDING ALLOYS INC

PITTSBURGH, PA 15215-2624 US

Telephone: 412-781-4255

Cage: 0ACE2

TIN

CAS: 7440-31-5

RTECS: XP7320000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9596

LEAD (SARA 313) (CERCLA)

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.05MG/M3, A3; 9596

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

NO OHTER HAZ MATLS IS PRESENT IN CONCEN GREATER THAN

RTECS: 9999999ZZ

Fraction By Weight: NA

LEAD (SARA 313) (CERCLA) (BARE WIRE COMPO)

CAS: 7439-92-1

RTECS: OF7525000

OSHA PEL SEE 1910.1025

ACGIH TLV: 0.05MG/M3, A3; 9596

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

BORON OXIDE (BORIC ACIDS) (FLUX COATING COMPO)

CAS: 1303-86-2

RTECS: ED7900000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3; 9596

FLUORIDES (FUME) (FLUX COATING COMPO)

ISOPARRAFINIC HYDROCARBONS

UREA (FLUX COATING COMPO)

CAS: 57-13-6

RTECS: YR6250000

ETHYLENEDIAMINE DIHYDROCHLORIDE (FLUX COATING COMPO)

CAS: 333-18-6

RTECS: KV3850000

OSHA PEL NOT ESTABLISHED.

ACGIH TLV: NOT ESTABLISHED.

ETHYLAMINE HYDROCHLORIDE

CAS: 557-66-4

SUCCINIMIDE (FLUX COATING COMPO)

CAS: 123-56-8

RTECS: WN2200000

OSHA PEL NOT ESTABLISHED.

ACGIH TLV: NOT ESTABLISHED.

WHITE PROTOPET IS (FLUX COATING COMPO)

SEBACIC ACID (FLUX COATING COMPO)

CAS: 111-20-6

RTECS: VS0875000

DIETHYLAMINE HYDROCHLORIDE (FLUX COATING COMPO)

CAS: 660-68-4

RTECS: IA3084000

SUCCINIC ACID (FLUX COATING COMPO)

CAS: 110-15-6

RTECS: WM4900000

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9596

POTASSIUM HYDROGEN FLUORIDE (FLUX COATING COMPO)

CAS: 7789-29-9

RTECS: TS6650000

POTASSIUM TETRAFLUOBORATE (FLUSH COATING COMPO)

CAS: 14075-53-7

RTECS: ED2800000

AZELAIC ACID (FLUX COATING COMPO)

CAS: 123-99-9

RTECS: CM1980000

OSHA PEL NOT ESTABLISHED.

ACGIH TLV: NOT ESTABLISHED.

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CHRONIC EXPOSURE TO HIGH LEVELS OF
AIRBORNE OR INGESTED LEAD MAY RESULT IN ANEMIA,NAUSEA.IT IS
UNLIKELY THAT NORMAL EXPOSURE TO THIS MATL WOULD RESULT IN ACUTE
ILLNESS.
Explanation of Carcinogenicity:PER
MSDS:CARCINOGENICITY/NTP/IARC/OSHA:NA.
Effects of Overexposure:LEAD:NAUSEA, ANEMIA, CONSTIPATION.
Medical Cond Aggravated by Exposure:TOXIC/CHRONIC EXPOSURE:KIDNEY AND
BLOOD DISORDERS.

First Aid:REMOVE FROM EXPOSURE;CONSULT PHYSICIAN.WHEN DANGER OF TOXIC
EXPOSURE TO LEAD EXISTS PERIODIC URINALYSIS & BLOOD TESTS SHOULD BE
RUN TO CHECK LEAD LEVELS.

Flash Point:NA
Autoignition Temp:Autoignition Temp Text:NA
Lower Limits:NA
Upper Limits:NA
Extinguishing Media:CO2, OR DRY CHEMICAL EXTINGUISHER.
Fire Fighting Procedures:USE NIOSH APPROVED SELF-CONTAINED BREATHING
APPARATUS & FULL PROTECTIVE CLOTHING IF INVOLVED IN FIRE.
Unusual Fire/Explosion Hazard:FINELY DIVIDED DUST MAY FORM EXPLOSIVE
MIXTURES W/AIR.WHEN OVERHEATED LEAD FUMES ARE TOXIC.

Spill Release Procedures:SOLID/RECYCLABLE.CONFORM WITH APPLICABLE
REGULATORY STATUTES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DUST SHOULD BE KEPT TO MINIMUM.
Other Precautions:VACUUMING RECOMMENDED FOR ACCUMULATED DUST.

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR WHERE DUST OR
FUMES ARE PRESENT.
Ventilation:LOC EXHAU:EXHAU FUMES AWAY FRM WORKAREA.MECH(GEN):ADEQU
VENTI SHOULD BE USED WHEN MATL IN DUSTY/MOLTEN STATE.SPEC:(SUPP)
Protective Gloves:RECOMMENDED FOR HIGH TEMPERATURES
Eye Protection:RECOMMENDED
Other Protective Equipment:STANDARD PROTECTIVE EQPMT NORMALLY USED IN
SOLDERING/APPLICABLE OPERATIONS.
Work Hygienic Practices:CONFORM W/LOCAL, STATE AND FEDERAL AND OSHA
REGULATORY STATUTES.
Supplemental Safety and Health
VENTI:CONFORM W/APPLICABLE REGULATIONS.

HCC:N1
Boiling Pt:B.P. Text:N/ESTABLISH
Melt/Freeze Pt:M.P/F.P Text:NP
Decomp Temp:Decomp Text:NP
Vapor Pres:NA
Vapor Density:NA
Spec Gravity:N/ESTABLISHED
pH:NP
Viscosity:NP
Evaporation Rate & Reference:NA
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER-GRAY, ODORLESS
Percent Volatiles by Volume:NP
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND ALKALIS.
Hazardous Decomposition Products:AT TEMPERATURES ABOVE METLING
RANGE/TEMPS, OXIDE FUMES MAY EVOLVE.

Waste Disposal Methods:WASTE SHOULD BE DISPOSED OF PROPERLY IAW LOCAL,
STATE AND FEDERAL AND OSHA REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.